• laboratory vacuum drying oven
• chamber volume: 22 to 111 liters
• working temperature: +5 °C above ambient temperature up to 200 °C
• work with inert gas possible
• wide range of variants and accessories
• interface for printer or PC-communication
• short terms of delivery 

The operation of the drying ovens VACUCELL is based on the vacuum drying with the opportunity of chamber air extrusion by inert gas. The electrically heated stainless chamber enables precise heating and drying of samples up to a constant mass. The standard equipment consists of door with window, integrated duct with the diameter of 40 mm with outlet in the upper piece, inert gas connection and needle valve for fine dosing. The inner chamber is made of stainless material (DIN 1.4571, AISI 316 Ti) and it is pressure resistant. For a case of internal overpressure the device is provided with safety valve-door “Ventiflex”.
The adaptable control unit Standard-line (on request: Comfort-line with many additional functions) ensures a homogeneous heating of stainless shelves throughout the chamber, exact course and possibility of documentation of processes. 

VACUCELL 

·         laboratory vacuum drying oven
·         work with inert gas possible
·         door with window for process monitoring
·         wide range of variants and accessories
·         installation of Vacustation possible
·         short terms of delivery

Basic technical data
- chamber volume: 22, 55 and 111litres
- working temperature: +5 °C above ambient temperature up to 200 °C
- wide range of vacuum (up to 10-3)
- control unit Standard-line or Comfort-line
- chip card system (Comfort-line only)
- interface for printer or PC-communication

Basic design components:
Self-supporting outer jacket made of galvanized steel sheet with hard and resistant baking varnish on the outer side. The inner single-jacket chamber with shelves is made of thick-wall stainless steel (DIN 1.4571, AISI 316 Ti). The door panel is made of large-area safety glass with a plastic foil, that enables to monitor processes in the chamber and serves as a large-area overpressure valve.
For the purpose of energy saving and minimizing the heat radiated to the ambient air the chamber is perfectly insulated with an ecological insulating material. The inner walls of the chamber can be easily removed without using any tool, e.g. for the purpose of cleaning. On top of that the chamber has a continuously adjustable air flap and inner glass door. The door is secured at four points for perfect tightening. The standard equipment consists of integrated duct with the diameter of 40 mm, inert gas connection and needle valve. There is possible to choose particular volumes of the Standard-line or Comfort-line according to the level of the microprocessor control unit.

Product Series Description 

The series VACUCELL is suitable for perfect drying of thermolabile and oxidation-sensitive materials, complicated components, for drying of samples up to a constant mass etc. in vacuum. These devices are suitable for plastic processing, in electrical engineering, chemical and pharmaceutical industry.
The series VACUCELL is characterized by noiseless run and soft heating of samples in the chamber and offers high-quality and save heating and drying of samples up to a constant mass. Therefore it is suitable for perfect and safe tempering and drying not only of thermolabile, oxidation-sensitive or powder-like materials in laboratories, but also of complicated articles with many holes and threads in industry.
The series VACUCELL offers high operation comfort and precise control and therefore it is suitable for demanding and precise tests and processes.
The devices VACUCELL can be, on request, completed by the box “Vacustation” without or inclusive the selected type of vacuum pump.
The devices VACUCELL meet requirements of technical-legislative regulations in CZ and EU.