Natural convection

• laboratory drying oven
• chamber volume: 55 to 707 litres
• working temperature: +5 °C above ambient temperature up to 250 °C
• wide range of variants and accessories 
• interface for printer or PC-communication 

The series ECOCELL is suitable for simple processes of drying and heating of common goods. For processing of aggressive substances we recommend the series DUROCELL with highly resistant Epolon-coating, protecting the chamber.
The operation of laboratory drying ovens ECOCELL and DUROCELL is based on soft gravitation air convection in the electrically heated chamber. The devices produce no noise.
The double-jacket design of the chamber together with adaptable control unit Standard-line (on request: Comfort-line with many additional functions) ensure a homogeneous temperature profile throughout the chamber, exact process course and short recovery times (return to the required temperature) after opening the door.
The standard equipment of the devices ECOCELL and DUROCELL includes also a continuously adjustable air flap into the chamber. 

ECOCELL 

·         laboratory drying oven
·         natural air ventilation
·         noiseless operation
·         microprocessor control unit
·         wide range of variants and accessories
·         special adaptations according to customer’s wishes possible
·         short terms of delivery

Basic technical data
- chamber volume: 55, 111, 222, 404 and 707 litres
- working temperature: +5 °C above ambient temperature up to 250 °C
- temperature setting in 1.0°C-steps
- control unit Standard-line or Comfort-line
- chip card system (Comfort-line only)
- interface for printer or PC-communication

Basic design components:
Sturdy design and perfect corrosion prevention are ensured by a self-supporting outer jacket made of galvanized steel sheet with hard and resistant baking varnish on the outer side. The inner double-jacket chamber and the door panel are made of high-quality stainless steel (DIN 1.4301, AISI 304). For the purpose of energy saving and minimizing the heat radiated to the ambient air the chamber is perfectly insulated with an ecological insulating material. The inner walls of the chamber can be easily removed without using any tool, e.g. for the purpose of cleaning. On top of that the chamber has a continuously adjustable air flap and can be provided with a door window and an interior lighting on request. The door is secured at four points for perfect tightening. There is possible to choose particular volumes of the Standard-line or Comfort-line according to the level of the microprocessor control unit. 

Product Series Description

The cost-effective drying oven series ECOCELL with the chamber volume of 55, 111, 222, 404 and 707 litres, working temperature from +5 °C above ambient temperature up to 250 °C and precise temperature control, is suitable for work with all common goods in laboratories and industry.

The series ECOCELL is characterized by a wide temperature range, noiseless run, soft air ventilation within the chamber and is suitable for high-quality and safe drying, heating and tempering of common laboratory materials.
This device offers high operating comfort, precise control and short times of temperature recovery in the chamber after door opening.

The devices ECOCELL meet requirements of technical-legislative regulations in CZ and EU.

DUROCELL 

·         laboratory drying oven for aggressive substances
·         natural air ventilation
·         stainless chamber with protective Epolon-coating
·         noiseless operation
·         microprocessor control unit
·         wide range of variants and accessories
·         special adaptations according to customer’s wishes possible
·         short terms of delivery

Basic technical data
- chamber volume: 55, 111 and 222 litres
- working temperature: +5 °C above ambient temperature up to 125 °C
- temperature setting in 1.0 °C-steps
- control unit Standard-line or Comfort-line
- chip card system (Comfort-line only)
- interface for printer or PC-communication

Basic design components:

Sturdy design and perfect corrosion prevention are ensured by a self-supporting outer jacket made of galvanized steel sheet with hard and resistant baking varnish on the outer side. The inner double-jacket chamber and the door panel are made of high-quality stainless steel (DIN 1.4301, AISI 304). Inner walls and the door panel are provided with a highly resistant Epolon-coating for higher protection. For the purpose of energy saving and minimizing the heat radiated to the ambient air the chamber is perfectly insulated with an ecological insulating material. The inner walls of the chamber can be easily removed without using any tool, e.g. for the purpose of cleaning. On top of that the chamber has a continuously adjustable air flap and can be provided with a door with window and an interior lighting on request. The door is secured at four points for perfect tightening. There is possible to choose particular volumes of the Standard-line or Comfort-line according to the level of the microprocessor control unit.

Product Series Description

The cost-effective drying oven series DUROCELL with the chamber volume of  55, 111 and 222 litres, working temperature from +5 °C above ambient temperature up to 125°C, precise temperature control and stainless chamber protected by coating of highly resistant plastic Epolon, is suitable for work with acids and liquors, for acid and basic hydrolysis etc.

The series DUROCELL is characterized by perfect corrosion prevention of all chamber parts, noiseless run and soft air ventilation within the chamber.
This device offers high operating comfort, precise control and short times of temperature recovery in the chamber after door opening.

The devices DUROCELL meet requirements of technical-legislative regulations in CZ and EU.