| |
Sterilizers
Ritter M9 UltraClave® Automatic Sterilizer
Today,
more than ever, you need products that are reliable and
simple to use. The Ritter M9 couldn’t be easier and is
time tested for reliability. You load it… set it… and
forget it. Select your cycle and the time is set for
you. Press “Start” and the Ritter M9 fills with the
correct amount of water. Once the sterilization process
is complete, the door opens automatically and quietly to
dissipate the steam to give you fast drying time for
your instruments. It’s real convenience!
The Ritter M9 sterilizer also has easy front access for
filling and draining and controls that are easy to
understand.
Programmable cycle features allow custom creation of
different cycle parameters for special sterilization
needs. Programmable buttons allow you to change the
following: Time (3 to 90 minutes), Temperature (230 to
275˚F), Dry Time (0 to 60 minutes), Vent (slow or fast)
and two program buttons allow you to store the custom
cycles.
Pre-programmed sterilization cycle controls: Unwrapped
(132؛
C or 270؛
F for 3 minutes), Pouched (132؛
C or 270؛
F for 5 minutes), and Packs (121؛
C or 250؛
F for 30 minutes).
The display Indicates cycle selected, cycle temperature
and exposure time for selected cycle. During the cycle,
it shows messages describing status of cycle. When the
cycle enters sterilization mode and dry mode, remaining
cycle time is displayed as well as temperature and
pressure.
You and your staff’s time is precious, so why waste it?
Break free from your sterilizer and spend your time on
more important tasks with the reliable and efficient
Ritter M9 automatic sterilizer. Make the industry
leading sterilizer your choice for sterilization and
have peace of mind.
Ritter M9D AutoClave® Sterilizer
The Ritter M9D AutoClave Automatic Sterilizer, an
economical option to the Ritter M9, offers easy,
effective sterilization. One button starts the cycle and
you must manually open the door within 30 minutes of
completion to activate the dry cycle. This extra step is
the only difference between the Ritter M9D and its fully
automatic counterpart.
Ritter M11 UltraClave® Automatic Sterilizer
Today,
more than ever, you need products that are reliable and
simple to use. The Ritter M11 couldn’t be easier and is
time tested for reliability. You load it… set it… and
forget it. Select your cycle and the time is set for
you. Press “Start” and the Ritter M11 fills with the
correct amount of water. Once the sterilization process
is complete, the door opens automatically and quietly to
dissipate the steam to give you fast drying time for
your instruments. It’s real convenience!
The Ritter M11 has easy front access for filling and
draining and have controls that are easy to understand.
Its unique 11" by 18" chamber gives it the distinction
of the most sterilizing capacity of any standard
countertop sterilizer on the market, making it perfect
for larger packs and instruments. An optional printer
accessory, available on both the Ritter M11, provides
records of the cycle, cycle time, temperature, and
pressure. The Ritter M11 has easily accessible, front
fill and drain tube features so you never have to move
it to maintain or drain the water.
Programmable cycle features allow custom creation of
different cycle parameters for special sterilization
needs. Programmable buttons allow you to change the
following: Time (3 to 90 minutes), Temperature (230 to
275˚F), Dry Time (0 to 60 minutes), Vent (slow or fast)
and two program buttons allow you to store the custom
cycles.
Pre-programmed sterilization cycle controls: Unwrapped
(132؛
C or 270؛
F for 3 minutes), Pouched (132؛
C or 270؛
F for 5 minutes), and Packs (121؛
C or 250؛
F for 30 minutes).
The display indicates cycle selected, cycle temperature
and exposure time for selected cycle. During the cycle,
it shows messages describing status of cycle. When the
cycle enters sterilization mode and dry mode, remaining
cycle time is displayed as well as temperature and
pressure.
You and your staff’s time is precious, so why waste it?
Break free from your sterilizer and spend your time on
more important tasks with the reliable and efficient
Ritter M11 automatic sterilizer. Make the industry
leading sterilizer your choice for sterilization and
have peace of mind.
Ritter M11D AutoClave® Sterilizer
The Ritter M11D AutoClave Automatic Sterilizer, an
economical option to the Ritter M11, offers easy,
effective sterilization. One button starts the cycle and
you must manually open the door within 30 minutes of
completion to activate the dry cycle. This extra step is
the only difference between the Ritter M11D and its
fully automatic counterpart.
Ritter M7 SpeedClave® Self-Contained Sterilizer
Ritter M7 SpeedClave® Self-Contained Sterilizer
The speedy M7 is the perfect choice for anyone looking
for an effective, manual sterilizer... at an
unbelievably low price. It sterilizes both wrapped and
unwrapped instruments, linen packs and glassware. From a
cold start, unwrapped instruments take only 9 minutes...
starting hot, it’s just 6 minutes! The M7, the
“workhorse of sterilizers,” is an investment that will
last... and last.
Installation
Use on laminate, stainless steel or stone surfaces.
Allow 2.5" (6.4 cm) on sides and rear and 12" (30.5 cm)
above, to allow space to fill the reservoir and for
cooling processed trays.
Midmark Soniclean® Ultrasonic Cleaners
No
one will argue that ultrasonic cleaning is the fastest,
most consistent and safest method of cleaning
instruments and components. But because ultrasonic
cleaners emit a high pitched sound, no one ever accused
them of being quiet…until now.
Introducing the Midmark Soniclean ultrasonic cleaners,
the quietest in the healthcare industry. They are quiet,
powerfully quiet.
Every office has different ultrasonic cleaning needs,
depending on the number of patients and the types of
procedures being done. That’s why Midmark provides you
with three size options that can be placed on the
countertop or even recessed.
Soniclean comes in three convenient sizes; choose the
one best designed to meet your needs.
An independent national laboratory ranked the Soniclean
the quietest ultrasonic cleaner among all units tested,
and the only ultrasonic cleaner to be ranked “excellent”
for noise comfort. That’s important for your staff and
patients. Reprints of the study are available on
request.
Soniclean is ranked quietest among this group of
ultrasonic cleaners by an independent national
organization.
You’ll be impressed how effectively the Soniclean
handles your instrument cleaning needs. Other ultrasonic
cleaners use a standard slim wafer transducer that
limits the maximum sound pressure that can be generated
to 2-3 watt/sq. in. The Soniclean utilizes an industrial
type ultrasonic stack transducer that results in a
cleaner capable of reaching 12-15 watt/sq. in. This
superior acoustic pressure generated by the stack
transducer, coupled with Soniclean’s Overlapping Wave
Frequency (OWF) technology, produces powerful cavitation.
More power in the tank translates to cleaning your
instruments quicker and more efficiently.
Typical transducer comparison to competitive cleaners.
Midmark’s unique, industrial quality stack transducer
gives you the best system on the market.
Your Midmark Soniclean is extremely easy to operate. All
you do is load your instruments and turn the timer!
You can be assured that your Midmark Soniclean will
perform very reliably, because it carries a Two Year
Limited Warranty.
Have it your way; Keep your Soniclean on the countertop
or recessed for a lower profile.
Soniclean ultrasonic cleaners integrate perfectly with
the Midmark Steri-Center Sterilization System. |