Gynaecology and Urology Table 6302

The full range of Sonesta couches is designed for professionals practicing in the modern healthcare industry. With the unique features available on the 6302, it is possible to perform a wide variety of examinations and procedures.

Assisted by an open and patented cantilever design, the unique height adjustment allows you to position your patient between heights of 40-100 cm. The minimum height allows easy comfortable access to the elderly and physically challenged. There is no need for any patient lifting devices or steps, the patient can sit down onto the table and the electrical motor raises them to a comfortable working level. Easy manoeuvrability allows quick and simple cleaning.

The seat cushion can be electrically tilted from 0° to +32° , allowing for the patient to be placed in a suitable working position benefiting both you and the patient. The back cushion can be hydraulically adjusted from -12° (for Trendelenburg positioning) to +70°. The flexibility of the adjustments make for infinite patient positioning possibilities for the physician.

Each table is supplied with the standard accessories that you would expect including Rissler leg rests with holders, a large stainless steel drainage receptacle, patient hand grips, foot control switch and adjustable paper roll holder.

As your needs and requirements change, Stille is always there to support you. A full range of accessories and options are available including footrests, battery back-up, 52000 Lux examination lamp, slide-in extension cushion, Colposcope attachment, uroflow mount, neck pillow, stirrups, drainage cone with outlet, seat cushions with cut out hole, etc. A wide variety of cushion colours are also available.

Each table is manufactured in Sweden under strict quality controls. Our manufacturing site is an ISO 9001 registered facility and each table conforms to CE and MDD regulations. Each product meets the requirements for electromagnetic compatibility (EMC) as shown in test results covering immunity and emissions in accordance with IEC 601-1-2.

Stille offer world-wide support and coverage for all of its products through an extensive network of subsidiaries and distributors, contact us for one nearest to you. 

Gynaecology and Urology Table 6302U 

The full range of Sonesta couches is designed for professionals practicing in the modern healthcare industry. With the unique features available on the 6302U, it is possible to perform a wide variety of examinations and procedures.

Assisted by an open and patented cantilever design, the unique height adjustment allows you to position your patient between heights of 40-100 cm. The minimum height allows easy comfortable access to the elderly and physically challenged. There is no need for any patient lifting devices or steps, the patient can sit down onto the table and the electrical motor raises them to a comfortable working level. Easy manoeuvrability allows quick and simple cleaning.

The seat cushion is fixed at 0°, while the back cushion can be electrically adjusted from -10° for Trendelenburg like positioning) to +70°. The flexibility of the adjustments make for infinite patient positioning possibilities for the physician.

Each table is supplied with the standard accessories that you would expect including Rissler leg rests with holders, a large stainless steel drainage receptacle, patient hand grips, foot control switch and adjustable paper roll holder.

As your needs and requirements change, Stille is always there to support you. A full range of accessories and options are available including footrests, battery back-up, 52000 Lux examination lamp, slide-in extension cushion, Colposcope attachment, uroflow mount, neck pillow, stirrups, drainage cone with outlet, seat cushions with cut out hole, etc. A wide variety of cushion colours are also available.

Each table is manufactured in Sweden under strict quality controls. Our manufacturing site is an ISO 9001 registered facility and each table conforms to CE and MDD regulations. Each product meets the requirements for electromagnetic compatibility (EMC) as shown in test results covering immunity and emissions in accordance with IEC 601-1-2.

Stille offer world-wide support and coverage for all of its products through an extensive network of subsidiaries and distributors, contact us for one nearest to you. 

Gynaecology and Urology Table 6303 

The full range of Sonesta couches is designed for professionals practicing in the modern healthcare industry. With the unique features available on the 6303 table, it is possible to perform a wide variety of examinations and procedures.

Assisted by an open and patented cantilever design, the unique height adjustment allows you to position your patient between heights of 40-100 cm. The minimum height allows easy comfortable access to the elderly and physically challenged. There is no need for any patient lifting devices or steps, the patient can sit down onto the table and the electrical motor raises them to a comfortable working level. Easy manoeuvrability allows quick and simple cleaning.

The seat cushion can be electrically tilted from 0° to +32°, allowing for the patient to be placed in a suitable working position benefiting both you and the patient. The back cushion can also be electrically adjusted from -10° (for Trendelenburg like positioning) to +70°. The flexibility of the adjustments makes for infinite patient positioning possibilities for the physician.

Each table is supplied with the standard accessories that you would expect including Rissler leg rests with holders, a large stainless steel drainage receptacle, patient hand grips, foot control switch and adjustable paper roll holder.

As your needs and requirements change, Stille is always there to support you. A full range of accessories and options are available including footrests, 52000 Lux examination lamp, slide-in extension cushion, Colposcope attachment, uroflow mount, neck pillow, stirrups, drainage cone with outlet, seat cushions with cut out hole, etc. A wide variety of cushion colours are also available.

Each table is manufactured in Sweden under strict quality controls. Our manufacturing site is an ISO 9001 registered facility and each table conforms to CE and MDD regulations. Each product meets the requirements for electromagnetic compatibility (EMC) as shown in test results covering immunity and emissions in accordance with IEC 601-1-2.

Stille offer world-wide support and coverage for all of its products through an extensive network of subsidiaries and distributors, contact us for one nearest to you.